EZ Flash Software Installation Instructions

This page will walk you through the EZ Flash software installation instructions. If you need any assistance with these steps, feel free to contact us.

Click here to view/download the EZ Flash User Manual

NOTE: Do not plug in the EZ Flash cable until you’ve performed the following steps.

Step 1 – Install the .NET Framework version 3.5. You may download this component from Microsoft by clicking **here**.

** - You may receive a “Setup Error” when performing this first step if the framework is already installed. If you receive a “Setup Error” you may proceed to the next step. If you are using Windows Vista or Windows 7, you may skip this step.

Step 2 - Install the appropriate drivers for your EZ Flash cable:

If your cable looks like a "black box", click here to download and install the drivers.

If your cable is RED, and is one piece, click here to download and install the drivers.

If your cable says Tactrix on it, and is in a translucent plastic case, click here to download and install the drivers.

Step 3 – Save EZFLASH.EXE in a safe location on your computer. You may download it by clicking **here**.

Step 4 – To use EZFLASH, simply double click on EZFLASH.EXE to start the application.